中文版 英文版
line
Company news
Company news
Current location:主页 > NEWS > Company news >
China aviation model processing factory, manufacturer, manuf
By: PlusMinusThree  Time2017-12-31



I recently released news, the company has more than Japan imported Tsugami CNC machining center, VA3 type model, technical parameters are the world's advanced machine company introduced multiple CNC machining center's purpose is very simple, is able to process more customers put forward to the processing of parts processing in Dongguan. Before this, most of the company by machine tool, now increase the processing center, really can be said to be the strength of the company so that the processing of a tiger with wings added.
Numerical control processing center and its parameters purchased by the company in Japan
Since then bought so many CNC machining centers, we should know how to use him, in fact, the operation of machining center is not difficult, the key is in the process of operation may have some minor problems or is a small fault, these small problems if you just a little attention or prevention, less likely to happen or, you know the existence of these problems, even if it is happening, but also know how to solve. First of all we want to know the CNC machining center is a kind of mechanical equipment and CNC system is composed of a complex processing automation equipment in Dongguan machine tool parts processing, CNC machining center will meet many problems in which we usually in CNC machining center process should not only pay attention to the maintenance of good at the same time also need to pay attention to in operation according to the rules of CNC machining center to operate in daily use, do not blindly, if because do not understand and blind operation, is likely to have resulted in very small problems, has become a big problem, and even become irreparable situation. In the following, we mainly enumerate some failures in the daily use of CNC machining centers and some simple analyses for CNC machining center failures.
1. error alarm of encoder pulse counting in NC machining center. This kind of problem is usually in the LED display screen system 6, PMM screen display 303/304/305/308 alarm, the main cause of the malfunction is the serial encoder servo motor in the operation of the digital pulse is not calculated or lost, this phenomenon needs to be shut down after the opening, the alarm will disappear, often, if there are alarm should be replaced immediately feedback motor or cable, but if the alarm disappeared is not too happy, we need to return to the reference point of NC machining center and other operation command to debug, weak PMM308 alarm may be caused by interference, then you can shutdown
2. CNC machining center processing center serial encoder communication error alarm. For this problem we should first check the encoder amplifier of CNC machining center CNC machine and connected with the accuracy of feedback lines or whether there is a disconnect phenomenon, if the motor feedback line has not perfect please go to the factory maintenance as soon as possible, usually at the encoder NC machining of the motor and the motor is connected to the best. Don't disassemble.
The NC machining center are divided into vertical CNC machining center and horizontal CNC machining center two categories of each product in the function and use of fault are similar, but more than two common problems, in fact there are many other problems, this as the machining center just to the company not long, the teacher is also familiar with the process of the day after, we can slowly to improve these problems, of course, if you have about this problem, or unique insights can contact us to discuss.
line

Copyright © 1986-2016 WWW.PLUSMINUSTHREE..COM

TEL: +86-020-29130182 FAX: +86-020-369660692 EMAIL: kon@plusminusthree.com

www.plusminusthree.com:

返回顶部